Categories

Hot Products

News

Plastic Seaming Machine For Pipeline Work
Aug 29, 2018

Plastic Seaming Machine is suitable for aluminum foil bags, plastic bags and composite bags in medicine, pesticides, food, daily chemicals, lubricants, meat products, seafood, fruits and vegetables, pickles, chilled meat, pharmaceutical products, hardware components, medical equipment, etc. Sealing machinery. The sealing machine is redesigned and manufactured according to the advanced models at home and abroad, and has the function of vertical and horizontal sealing. It is suitable for sealing and bag making of all plastic film. It is the ideal sealing equipment for food factories, cosmetics factories, pharmaceutical factories, etc. It can run continuously, and can also date and batch number according to user needs. Suitable for pipeline work.

The general sealing machine is composed of a frame, a speed reduction transmission mechanism, a sealing printing mechanism, a conveying device and an electrical and electronic control system.

When the power is turned on, each mechanism starts to work, and the heating element is heated after being energized, so that the upper and lower heating blocks are heated up sharply, and the temperature is controlled to the required temperature by the temperature control system, the printing wheel rotates, and the cooling system starts to cool as needed, and the conveyor belt is sent, And adjusted by the speed control device to the required speed.

When the package containing the article is placed on the conveyor belt, the sealing portion of the bag is automatically fed between the two sealing tapes in operation and brought into the heating zone, and the heat of the heating block is transferred to the sealing portion of the bag through the sealing tape. The film is melted by heat, and then passed through the cooling zone to appropriately lower the surface temperature of the film, and then rolled by a knurling wheel (or a printing wheel) to bond the upper and lower plastic films of the sealing portion and press the mesh pattern (or printed logo) ), the sealed bag is sent out of the machine by the guiding rubber belt and the conveyor belt to complete the sealing operation.

Regularly clean the surface of the Plastic Seaming Machine, the bottom plate and the lower die slide, the groove, the upper mold inner pressure plate and the positioning rod (Note: the power must be turned off and the normal temperature is restored). The lower die slide, the pressure bar bearing, the eccentric wheel and the guide post, the guide rail and other transmission parts are regularly added with butter to ensure the performance of the machine. To clean the cutter: first use the cotton ball to plug the two drain holes of the lower mold, pour the boiling water into the groove of the lower mold, fill it up, then push the lower mold slide into place, press the upper mold down, press At the lowest point, let the knife immerse for a few minutes until it is clean and repeat several times.


Previous:What Is A Hot Air Welding Machine?/Next:No Information
  • QR CODE
  • facebook