Hot Air Plastic Hot Air Welding Machine
1.Features of Hot Air Plastic Hot Air Welding Machine
(1).Equipped 3400W Leister heat gun Original from Swiss,Lifetime can reach 6-8 years.
(2).3400W Big power,strong wind, welding result more perfect.
(3).Special design for more Wide and long nozzle,More efficient and strong.
(4).LED display,set and actual temperature can see clearly.
(5).Having Handrail,can operate with stand.
(6).Landing gear,can push it on group after finish welding.
2.General instruction for Hot Air Plastic Hot Air Welding Machine:
Warning: The basic principal of safe protection should be followed to reduce the danger of fire in disaster, electric shock and personal harm. Please pay attention to the following items carefully before operation.
(1).Keep the working place clean. Messing up and the disorderly working place cause disaster
(2).Choose the work place carefully and use the machine in a bright and dry circumstance.
(3).The electricity, controlling box and protective facilities have to be in the proper order after finishing daily work. The electrical power supply has to be switched off definitely.
(4).The machine has to be stopped before gets maintenance or replacing the parts.
(5).Use standard or indicated tools when dismantling or replacing parts.
(6).For safety and the long life of the machine, please do not let the machine operates overtime.
(7).If any special incidents happened, please stop the machine first for repairing, And do not deal with the special incident with improper procedures.
(8).If the machine is operated on land, keep the work place clean and no dust there. If dust or something blocks the inhaling filter of heater, the heating wind can not come cut adequately and then temperature inside of filter will rise to let the heater burn down.
3.Specification of Hot Air Plastic Hot Air Welding Machine:
4.Details of Hot Air Plastic Hot Air Welding Machine
5.FAQ of Hot Air Plastic Hot Air Welding Machine
(1)Is it easy to operate LIUDU welding machine?
Very easy, people with a junior high school education only need to read the manual and watch the use of video will be able to grasp the basic method of use, and then in their own factory they can grasp the approximate temperature and walking speed after they made a few test with their material.
(2)How to set the temperature and walking speed?
There is no doubt that different types and thickness of the banner with different temperature and walking speed. Because the melting and bonding need a certain temperature, the approximate temperature range is between 300-500, the walking speed is 3-6. The thicker the printing cloth the more heater needed the higher the temperature used.We need according to our own material to make a few test and get a best match temperature and walking speed.
(3)A few problems of after-sales with welding machine.
A:No heating ,may be because the heater element aging,you need change a new heater element.(Video will be mentioned)
B:No walking, may be because the walking switch failure,you need to correct it or change a new one.(Video will be mentioned)
(4)The problem of consumable accessories
There are two main consumable parts , heating element and fan, Zhengzhou LIUDU provide related services to meet customer requirements.