Manufacture PVC Hot Air Banner Welding Machine
This PVC Hot Air Banner Welding Machine is widely used for welding PVC, PE and other PVC materials that can be hot melt.When picture size more than printer printing width, need to split the picture to some part, after print out then weld them together.
1.Product parameters of PVC Hot Air Banner Welding Machine
Hot air gun
Original leister 3400W heat gun
2.Advantage of PVC Hot Air Banner Welding Machine
(1).No need glue, use hot air to weld;
(2).Temperature, speed, fan motor speed are adjustable;
(3).Welder nozzle has a sensor, can make the true temperature accurately;
(4).High welding quality.
3.Operation steps of PVC Hot Air Banner Welding Machine
A.Make the cloth for seaming flat and put it underneath.Fix both ends by adhesive tape or something else.
B.The overlap width of the two pieces is about 3 mm,the width of the nozzle of hot seaming machine.
C.Put the machine nozzle between two overlap pieces.
D.The press wheel should be at left side of nozzle.The nozzle also need align with side of upper piece of cloth.
E.Switch on the motor power and then adjust speed.
F.Turn on the movement switch.
G.Press heating power key to adjust temperature.
H.Turn the bar by anticlockwise to fix the position to startup automatic movement.The machine will go along with the overlap path by itself.
I.Turn the bar by clockwise to cease the automatic work.
J.The operator should control the moving direction and make sure the nozzle connect both with upper and under piece cloth.
4.Certificates of PVC Hot Air Banner Welding Machine
5.Shipping way for PVC Hot Air Banner Welding Machine
(1)We will declare the low value on the shipping invoice to reduce your custom tax.
(2)International express: DHL, FedEx, UPS, EMS; sea shipment is also available.