Portable Hot Air Banner Welder
1.Exhibitions we attended
2.Parameters of Portable Hot Air Banner Welder
Hot air gun
3400W heat gun
3.How to operate Portable Hot Air Banner Welder
(1)Make the cloth for seaming flat and put it underneath.Fix both ends by adhesive tape or something else.
(2)The overlap width of the two pieces is about 3 mm,the width of the nozzle of hot seaming machine.
(3)Put the machine nozzle between two overlap pieces.
The press wheel should be at left side of nozzle.The nozzle also need align with side of upper piece of cloth.
(4)Switch on the motor power and then adjust speed.
(5)Turn on the movement switch.
(6)Press heating power key to adjust temperature.
(7)Turn the bar by anticlockwise to fix the position to startup automatic movement.The machine will go along with the overlap path by itself.
(8)Turn the bar by clockwise to cease the automatic work.
(9)The operator should control the moving direction and make sure the nozzle connect both with upper and under piece cloth.